New premium car brand in UK, DENZA, tows Boeing 747 ‘jumbo’ using its SUV on only two wheels
- The DENZA BAO 5 SUV has towed a Boeing 747-400 at a UK airfield, achieving several firsts in the process
- Modifications to the standard car were minimal; additional ballast was installed to improve traction and extra stabilisation balanced out the removal of two wheels
- The BAO 5’s DMO (Dual Mode Off-road) powertrain remained completely unchanged; it maximises torque to the driven wheels – even when using just two of them
18 November 2026 DENZA, the premium technology-oriented automotive brand of the BYD Group, has successfully towed a Boeing 747 with its new BAO 5 SUV in the UK, using just two driven wheels. This incredible achievement represents several firsts for the brand’s rugged off-roader, including the first production car to tow a plane on two wheels and the first to tow a 747 on electric power alone.
While moving a 180-tonne aircraft on all four wheels would have been an impressive achievement in its own right, DENZA’s engineers wanted to push the boundaries even further. Ambition and innovation are cornerstones of the BYD Group, with its 120,000 engineers and over 40 patents per day. They set out to achieve something hugely ambitious: something that had never been tried before, and something that truly challenged the capability of the advanced DMO plug-in hybrid powertrain.
Taking place at Dunsfold Aerodrome in Surrey, three runs were completed: on all four wheels, a second on three wheels, and a final run on two wheels. Over the combined distance of all three runs, allowing for stops for filming and to remove wheels, the BAO 5 towed the 747 for a total of 1,600 metres – the equivalent of four laps of a standard size athletics track. The driver behind the wheel for these successful attempts was BYD UK’s senior technician Mark Gallifant, who comfortably surpassed his own previous-best payload of a double-decker bus fully loaded with fare-paying passengers.
The car used for these runs was a standard, production-specification BAO 5 in Ultimate guise with minimal modifications. A bespoke towing attachment was fabricated to connect the BAO 5 to the aircraft, while interior passenger seating was removed to facilitate the installation of 4500kg of ballast when driving with two wheels, and 2,000kg when driving on three wheels. In addition, small stabilisers were added to each axle to balance out the removal of the two driven wheels.
The BAO 5’s DMO plug-in hybrid powertrain was also used in its normal form. This features three electric motors (one driving each axle, plus a third generator unit) and a 1.5-litre turbocharged petrol engine, delivering a total system output of 544PS and 760Nm of torque. The BAO 5 has a range of 56 miles on electric power alone, and a range of 537 miles on a full tank of petrol and a full charge.
The aircraft used for these runs was a Boeing 747-400, which left active service in 2020, but which still retains its engines and fully furnished interior, weighing approximately 180 tonnes.
In typical British fashion, the weather conspired to make things even more challenging for the project’s technical team. While initial practice runs were carried out with ease, torrential rain on the day of the final attempts made things far more challenging. However, eventually, the runway dried out sufficiently for the car to find enough traction to get the 747 moving. After each run, vehicle checks were completed and these confirmed no signs of stress on the powertrain, chassis or even the tyres.
Videos of the DENZA BAO 5 towing the jumbo jet can be viewed here: https://youtu.be/JfuZRUr7P24
|
DENZA BAO 5 specification |
|
|
Trim |
Ultimate |
|
Dimensions (L/W/H, mm) |
4921/1970/1930 |
|
Wheelbase (mm) |
2800 |
|
Kerb weight |
3035 |
|
Max system power/torque (PS/Nm) |
544/760 |
|
Front electric motor max power/torque (PS/Nm) |
272/360 |
|
Rear electric motor max power/torque (PS/Nm) |
388/400 |
|
Rear electric motor max torque (Nm) |
400 |
|
Petrol engine displacement/aspiration |
1.5L, turbo |
|
Max petrol engine power/torque (PS/Nm) |
150/240 |
|
0-62mph acceleration time (seconds) |
5.0 |
|
Top speed (mph) |
112 |
|
Battery capacity (kWh) |
31.8 |
|
WLTP electric range (miles)* |
56 |
|
WLTP combined range (miles)* |
537 |
|
CO2 emissions |
30g/km |
|
Max charging power (DC) |
100kW |
|
Battery type |
BYD 2nd Generation Blade Battery (LFP) with |
|
Towing capacity (kg) |
2500 |
|
Front/rear suspension |
Double wishbone with DiSus-P intelligent body-control system |
|
Front/rear brakes |
Front fixed calipers with ventilated discs |
*WLTP data
####
About DENZA
DENZA is the premium design- and technology-led mobility brand from BYD Group. It successfully mixes European-influenced sophisticated design with state-of-the-art platforms and technologies, delivering many unique features to the premium car market. The brand was founded in 2010 as a partnership between BYD and Daimler, and launched its first vehicle in 2014. It is being introduced to the European market during 2026.
About BYD Auto
Founded in 2003, BYD Auto is the automotive subsidiary of BYD, a multinational high-tech company devoted to leveraging technological innovations for a better life. Aiming to accelerate the green transition of the global transportation sector, BYD Auto focuses on developing pure electric and plug-in hybrid vehicles. The company has mastered the core technologies of the entire industrial chain of new energy vehicles, such as batteries, electric motors, electronic controllers, and automotive-grade semiconductors. It has witnessed in recent years significant technological advancements, including the Blade Battery, the DM-i and DM-p hybrid technology, the e-Platform 3.0, the CTB and iTAC technologies, the DiSus Intelligent Body Control System, the XUANJI Architecture, and the Super e-Platform. The company is the world’s first carmaker to stop the production of fossil-fuelled vehicles on EV shift and has remained top of new energy passenger vehicle sales in China for 12 years in a row.
About BYD Europe
BYD Europe is headquartered in Hungary and was the first overseas branch of BYD Group, with a commitment to evolving the international brand BYD Auto to deliver safe and efficient sustainable solutions in new-energy vehicles through world-leading technological innovations.
Contacts:
Mike Gale
Head of PR, BYD and DENZA UK
M +44 7908 905678
E michael.gale@byd.com
Rachel Goodwin
PR Manager, BYD and DENZA UK
M +44 7399 678373
E rachel.goodwin@byd.com
Alex Ingram
Press Officer, BYD and DENZA UK
M +44 7539 534571
E alex.ingram@byd.com